Adjustable doll stand for Rainbow / Monster High

Stable doll stand for Rainbow High and Monster High Dolls
37
230
1
1186
updated January 4, 2024

Description

PDF

Print in the suggested orientation, with at least 3 Walls and 15 % infill.

Assembly:

  1. Insert the shaft into the base. This may require a little bit of force, as the tolerances are fairly tight.
  2. Insert a M3 bolt of at least 8 mm into the bottom of the base plate to fix the shaft to the base.
  3. Insert a M3 nut and bolt in the clip as shown in the picture. The bolt should be at least 8 mm long. 
  4. put the clip on the shaft and use the bolt to fix it at the desired height.

 

Tags



Model origin

The author marked this model as their own original creation.

License