Absolutely fantastic Model!
I have printed tons of them. Any chance there are reversed dials for the smaller counter in the works?
I love it but everytime i go to use it i spin it the wrong way at first!
Great model and amazing to use, glides well!! thanks for making it.
Clicky 2 Digit Counter (+Smaller Version)
Simple 2 digit counter but clicky, plus a smaller version.
46
173
3
1106
updated February 1, 2025
Makes
Comments
@Oyster8253_1660435 I was halfway through commenting that it's not at the top of my list and how you could modify it yourself if you wanted to, and then I realized it was easier to just do it. So reversed versions are uploaded! It's funny because I think in the beginning I reversed the original one because it felt wrong, but at this point I've completely confused myself as to which direction is better and get it wrong half the time.
Are you missing a smaller spring file? I tried to print the smaller version with the only spring file there and it looks to be to big.
@NrJuan_161191 Edit: yes, yes I was. Thanks for pointing that out! (edited)
@ScottyDoesKno_259504 no worries. Thanks for a great design!
Printed in blue PLA, 0.6 nozzle, 0.2 layer. Numbers colored in Posca white cover marker. Will reprint with 0.4 nozzle for better detail.
The mini looks great in tri-color filament. I have a couple of the original and prefer the mini / thin one. I printed the springs but they are stiff, break, and get stuck. I cut out a notch on each side of the small design and the springs work now. I uploaded remix.
Great work. Thanks. (edited)
@VagrantMugen Looks awesome! You might want to try printing the springs in a more standard filament, I've found that a lot of the fancier (silk in my case) filaments have different properties that may not work as well. The one I printed is harder to turn than the original size due to the shorter spring arms, but works fine.
@VagrantMugen Bit late now but turns out I never uploaded the proper springs for the small version.
Awesome! Does a great job clicking, and holds the dials in place so they don't turn on their own!
