5+1 mount for wifi/cellular antennas. For use with the proxicast ultra low profile puck antennas. I'm not sure if other brands will work, but should if they are identical dimensions.
Depending on your bed dimensions, you can print the base in 1 or 2 pieces. If 2 pieces, carefully super glue them together and sand for smoothness if necessary.
Assemble with #4-40 ½" to ¾" screws.
Attached to surfaces with 3M command strips. Tested at high speeds with 3 strips 👌
https://www.amazon.com/Proxicast-Profile-Omni-Directional-Screw-Mount-Antenna/dp/B07DDC9WV5
https://www.amazon.com/Proxicast-Ultra-Profile-MIMO-Antenna/dp/B08QGKHFXW
https://www.amazon.com/Proxicast-Low-Profile-Omni-Directional-Screw-Mount-Antenna/dp/B01JDT9Y6E
The author marked this model as their own original creation.