Do you have the wiring diagram for the controller available?
LienCNC V2 (CNC Router)
This is a heavy duty CNC Router I designed in 2020, and finished building in December of 2020.
90
423
0
4568
updated July 3, 2021
Makes
Comments
@Neeqone_67207 Sorry I just saw this message, I didn't get notifications when it first was posted. I didn't do a proper wiring diagram. Just wired per my own knowledge, and the factory diagram from CNCDrive. Every system would be slightly different. But if you look at my UCCNC config it will give you a good idea of how I configured my wiring.
I've been studying your Fusion 360 model and find it to be a very nice design; good work! Having designed a few different CNC routers myself, I appreciate the work that goes into getting everything right before the first plates are cut. I noticed that you bolt the BK12 bearing blocks directly to the extrusions. I generally make an adapter plate and use the available T-slots and never really considered drilling and tapping the extrusion. Just wondering how that has worked out for you. You can find some of my designs on GrabCad if interested. https://grabcad.com/ed.frazier-1/models?page=2
Again, nice job and thanks for sharing!
Ed
@ECF_331962 Wow, just looked over some of your designs out on Grabcad. Very nice.
Yeah for the BK12 bearing blocks bolted directly to the extrusion it was a gamble, everything had to be perfect to work. The holes for the blocks can go across internal ribs of the extrusion so it needs to be piloted with an endmill not a taper tipped drill bit or it can walk.
I like the idea of the adapter plate for adjustment. I was trying to minimize the spacing stackup of X and Z by skipping the plates
Thanks again for the kind words. I wish I had seen your designs before designing mine. I would likely of incorporated some of its features. (edited)
Fantastic work
Thank you, it was a lot of fun to build.