Remix for the K1 Max Riser with a channel for LEDs.
37
209
1
2232
updated April 2, 2024

Description

PDF

This is a remix to add a channel for LEDs at the bottom of the Full Bar. I used a set of 24v LEDs which are 8mm wide to light up the build area of the K1 Max a little better than the stock LEDs. Each segment has 18 LEDs and with the ability to have 4 of these sections connected (I used a 2 ping connector) I was able to get 72 LEDs.

I printed upside down and added just enough support for the overhang at the top of the print (bottom of the LED channel).

The second file has the K1 MAX name on the front if wanted. I think it makes a big difference for the amount of light shown on the build plate.

Edited 01-APR-2024

Added a 10mm version for those with wider LED strips

Edited 02-APR-2024

Added a 12mm version but I do not currently have these size LED strips to test so please let me know if this size does not work

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Added a channel for the LEDs at the bottom of the Full Bar.I used a set of 24v LEDs which are 8mm wide to light up the build area of the K1 Max a little better than the stock LEDs. Each segment has 18 LEDs and with the ability to have 4 of these sections connected (I used a 2 ping connector) I was able to get 72 LEDs.

License