Prusa mk3s Z-axis 10mm Rod MOD

LM10LUU 10mm rod Z-axis for MK3S/ MK3S+/ MK3.5
12
66
0
787
updated January 19, 2024

Description

PDF

MOD to make the Z axis of Prusa mk3s 10mm

Uses mk3s  carriage

The mounting positions of the bottom and top parts are 1mm outside of the mk3s and 6mm inside of the mk4

Also, because x_end is 4mm higher, the top part is installed from the back side to make it 4mm higher.

Caution

It may be necessary to cut down a little

You may need to modify this MOD yourself.

Parts required for assembly: 

  • x2 Smooth rod 10 x325mm for Z-axis
  • x2 LM10LUU linear bearing for Z-axis
  • Various other screws used in mk3s and mk4, etc.

Notes:

Model origin

The author remixed this model.

Differences of the remix compared to the original

370mm rod 45mm width

mk3s carriage can be used

License