Square Mounts for Wall Control

This uses the DDD Printable Wall Control System (github) to mount the squares.

Squares that I've mounted:

• 100x70mm machinist
• 200x130mm machinist
• Speed Squares - 7" and 12"
• Combination Square

I'd recommend using the locking spacers facing the wall mount, the 2x1 will work for behind all of these except the large 12" speed square - use the 2x2 for that one.  These can be used to lock in the mount using the threaded pin. Use the standard pin to connect any other joints.

If you have another similar square that you'd like to mount, contact me with dimensions and I can probably make a version for you.

Additional mounts for woodworking squares.