Simple handle for opening and closing drawers etc. Mine broke so I took basic measurements and designed it quickly with Fusion 360.
It's designed to be used with 4 mm (wood) screws. The hole diameter is 3.4 mm so the screws can bite well into it without cracking the object.
Some basic measurements:
Length: 146 mm
Height: 28.5 mm
Finger space: 22.27 mm
Hole depth: 20 mm
For easy installment I've added a drill template. The hole diameter there is the full 4 mm.
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: No
Resolution: 0.2mm
Infill: 30% Honeycomb
Filament: OWL Filament PLA Aluminium Grey
Notes:
Because it should be a stable part I recommend using five perimiters and five top and bottom layers.
The author marked this model as their own original creation. Imported from Thingiverse.