Meanwell LRS-350 PSU mount

A quite universal (requires 4xM4x10 bolts and 4xM4 screws) mount for Meanwell-LRS-350 series PSU. Holding screws are hidden within the mount for hers&your pleasure (aesthetic lvl over 9000) in a pocket slanted 40 degrees.

I'd suggest at least PETG for the print, since the PSU enclosure sinks some heat, but if you're feeling frisky PLA might be okay.

Suggested order of operations

• mark where you want to mount your PSU
• screw in right or left holder (orientatiton kind of counts here, be careful)
• place PSU (do not screw it in yet) and mark the other holder locatiton
• screw in second holder
• mount the PSU and enjoy As is always the case with PSUs, you might come into contact with high-voltage AC. DO NOT do any of this, unless you know what you're doing.