Kusba X Axis Mount for Neptune 4, 4 Pro, and 4 Max

I designed this to mount on the top front of the hot end to avoid homing interference.
22
142
0
1280
updated December 31, 2023

Description

PDF

I did not search exhaustively, but what I found was a nicely designed mount, but it was situated on the rear of the X Axis carriage and because of it's position X could not be homed while it was installed.  I designed this so I can just leave the Kusba on it indefinitely with no interference of normal operation. I used 10mm long 3mm socket cap bolts to mount the assembly in the existing hot end cover bolt holes. I mounted the Kusba with 6mm long 3mm socket cap bolts to the mount to the assembly. 

Tags



Model origin

The author marked this model as their own original creation.

License