HGX Lite 2.0 (oblique tooth) extruder mock-up model

This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths).

Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position. Coordinates are based on filament path (XY) and bottom of extruder (Z).

There are 3 STL-s:

• only extruder
• extruder with standard Nema14 20mm depth (as sold in set with extruder)
• extruder with short Nema14 17mm depth (like Moons motors sold with TBG-Lite)

Source files in OpenSCAD can be downloaded from https://github.com/majekw/vn-corexy/tree/main/HGX-Lite2