Hello there,
I was intrigued and amazed by some of the beautiful voronoi models on the internet, so I wanted to try it myself. I chose to give it a bowl shape and form since I enjoy practical things, therefore I designed and offeredgive you my Bowl - a Voronoi pattern bowl.
But, let's face it, you're not going to put something little in there like sweets anytime soon. However, you may try scaling it down to match your needs.
Print settings :
Layer height: 0.15mm or 0.2mm
Infill: 20% or 30%
Wall thickness: 1.2mm
Top/bottom thickness: 3mm
Print speed: 20mm/s or 80mm/s
Temperature: 200°C or 210°C
Additional tips:
No supports are required; I attempted to keep the number of overhangs and lengthy bridges to a minimum for optimal printability, but if you want to improve the look from the bottom on the little bridges and steep overhangs, you can use supports. In this instance, tree supports will be ideal.
Size: 200x200x90 mm it is easily scalable if you want larger or smaller size.
If you like this model, check out my other models and leave a comment. :)
I am looking forward to your makes,
Augustas
The author marked this model as their own original creation.