Headset Hook Attachment for PC case thumbscrews

Hook attachment for PC case thumbscrews to go between glass and thumbscrew. Main purpose as headset hook/hanger.

14m

1× print file

0.20 mm

0.40 mm

3.00 g

230

updated December 30, 2023

Description

The model is print-in-place, no supports needed. Works best with headsets having a headband-depth of ~30-35mm.

When the thumbscrew is in place, you can tighten the hook by turning it. Be careful not to screw it too tight.

I used black PLA and raised the infill to 25% for the example make.

The author marked this model as their own original creation.