A roller skate style spool holder uses 4 bearings.
Requires: 4 - 608 (Skateboard) bearings [7x22]
Instructions: Peel the tiny brims off the c-clips. Twist off the support material from the rollers. Mount the bearings on the end of the rollers and secure with the c-clips. Load the roller assemblies into the cradle from the bottom. If something obstructs fully seating the rollers please gouge it out and continue. Please return to PrusaPrinters.org to rate, comment and share pics of your print.
There are two color changes which place a stripe down the center of the roller. So start with the base color, switch to your center stripe color, then back to the base color. Or don't change colors when it asks, it's up to you.
The author marked this model as their own original creation.