Gift Box 1

I've seen several fun gift boxes online and wanted to take a crack at making my own.

To release the lid, slide the bow to one side.  The 3 sliders in the lid are geared together and will pull the latches clear of the sides of the box. The lid can lift straight up.

I printed this at a layer height of 0.2mm out of PrusamentPLA for dimensional accuracy.

Technically it can be printed without Supports, but I painted on a few where I thought they would help. 

The sliders were a bit snug so I sprayed a little silicone into the gaps and it now moves very smoothly.  Dry lube or graphite also work well.

The Bow and Top ribbons are attached with superglue.