SecKit SK-Tank v2 Accessories Pack

This collection includes:

• Plugs: In various shapes/sizes, these are for closing up any remaining holes in your enclosure to keep the hot air in and raise your maximum chamber temp. Print them in TPU and scale them as necessary so they fit snugly.
• Switch Covers: Use these to cover and enclose the back sides of the power switches and associated wires. Note: the right one is for my beta kit; but I believe Ernest may be moving the PTC heater switch. Also, for kits without an enclosure or PTC heater, I may need to make a plug to close up the frame hole for the PTC heater switch.
• Z Pulley Covers: These are to cover the bottoms of the Z lead screws, their belts and stepper pulleys. The current version doesn't completely cover the Z pulley, but it helps a lot with stuff potentially getting in there and jamming the belt. I will get around to designing one for the back center sometime soon! 
• Octopus Pro with 120mm Fan Mount: I designed this for the Tank v2, but it's useful for any printer really. It has built-in standoffs and includes a hinged mount for a 120mm fan to cool the drivers. Use M4 screws to mount the fan arm to the base, and put your choice of 120mm fan covers on the outside (I made one with a SecKit logo, but I won't post that until I get permission from Ernest).
• 7 Inch LCD Mount and Case: This is an enclosure for this 7" LCD screen: https://www.amazon.com/gp/product/B09XKC53NH. Probably not useful for you unless you buy that specific screen, but if you do, this will let you mount it to the enclosure. Use M3 screws and standoffs.
• LED Strip Mounts: These are linear pieces that clip to the upper frame and give you a way to mount a removable LED strip without interference with bolts, enclosure panels, or dome legs. Print four X mounts and four Y mounts, half of them mirrored in the long direction, and put a mirrored pair on each side of the frame. The LED strip can stick to the bottom and I've also provided notches and holes for zip ties. The mounts are designed for 12 mm wide RGBW strips with connections and gaps every 50 mm, like this one:  https://www.amazon.com/gp/product/B07G5CJ1LY.

I will continue to add new parts here as I design and test them.  I also intend to move my dome design for Tank v2 here, but for now it is at this page: https://www.printables.com/model/692902-seckit-sk-tank-v2-dome.  That is based on my dome design for Tank v1 here: https://www.printables.com/model/142284-seckit-sk-tank-dome.