Elegoo Neptune 4 / Pro Filament Dryer Shelf

Arm and platform (Shelf) fitted for Elegoo Neptune 4 to hold ERYONE Filament dehydrator to print out of comfortably.
28
172
0
2241
updated December 29, 2023

Description

PDF

Created by me, a Filament dryer shelf mounted to already existing open mount on Neptune 4 (I recommend the right side as tightens as weight is added where on the left it will loosen and fall). 

I originally was gonna put side walls to stop it the filament holder from falling when it moves side to side but I didn't like how it looked so I added double-sided foam tape on mine but anything sticky should do. I also added fuzzy skin on the face of the shelf that the holder would sit on to give more grip (The flat side).

The arm itself takes most of the movement (which is why I recommend tightening on the right side). I specifically have the ERYONE M2 Snail filament holder and is measured to fit this perfectly but I'm sure in tinkercad you can remove the screw on piece and resize to your need then put the screw on piece back on.

Put arm on first then shelf part won't spin on the other way around. I printed in black elegoo PLA.

Let me know in the comments if there is anything you would like as a revision i will try my best to help out. If Gcode or 3mf is required let me know in the comments. I doubt it for as niche as it is but if you do want to use for commercial use reach out to me. 

 

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more