eTrex garmin bike barholder

Made this one since other i found was only i one piece and that made some parts fragile when printed in the supposed direction (like the holding arm and bar holder). The Arm should be printed laying down aswell as the bar holder, see picture. It was glued together with acetone. Using a M4 bolt >35mm (40 mm in picture).

Made for 25 mm handle bar but could be modified.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Clone

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50%

Notes:

Brim 5 mm if you need

Post-Printing

I like that the color match :)