MacBook Pro M1 Charger Storage - 140W

Sized specifically for the Apple MAC M1 charger with a capacity of 140W. It is a pretty tight fit if your tolerances are good - so size up a bit if you want it looser. The charge port is accessible while the charger is inserted, so leaving it in the organizer forever is an option!

Could be printed vertically for stronger charger holding, but I printed mine flat with lots of supports for the big flat overhangs. Printed in Inland white PLA.

Resized the charger half to fit the 140W charger, while keeping the cord wrap and MagSafe sized holes the same.