Mandalorian Helmet with modular Rangefinder

This model connects the chopped up mandalorian helmet with a rangefinder and a cap with the mandalorian insignia. 

The model is a remix of the Helmet (https://www.printables.com/de/model/583752-clone-trooper-rangefinder-bf2) and the Rangefinder (https://www.printables.com/de/model/583752-clone-trooper-rangefinder-bf2).

The original model is scaled for a head of ca. 58cm circumference and the model is not yet parametric so you'll have to scale it and figure out if the connections and stuff still fits.

The 100% scaled version uses 5 10x2mm neodynium magnets for the connector and a 3mm wood screw to connect the rangefinder to the female part.

The rangefinder uses a 24x37mm plexiglass screen which can be glued onto the inner shoulder.

There is also a a version of the rangefinder with a little cavity for a 6mm LED to illuminate the plexiglass screen. 

I recommend printing with these settings:

20% Infill, Supports, Brim

Also I havent finished building the model yet so excuse the jagged pictures, will update when im done.

Added rangefinder connector to right cheek, clone trooper rangefinder for inspiration on the bayonet connector.