Hydraflow 40 oz Capri Handle

My daughter did get a Hydraflow 40 oz Capri for Christmas, but the handle broke. So I created the handle for 3D printing
3
26
0
238
updated December 25, 2023

Description

PDF

This handle can replace the handle of a Hydraflow 40 oz Capri (see https://hydraflowbottle.com/collections/40oz-capri). Sadly we dropped one and the handle just broke - just some bad luck I think. Anyways I then recreated the handle for 3D printing.

Some notes:

  • I did print this with 3 perimeters and 25% infill, this configuration I can say works. You still may get good results if you use anything different.
  • Filament used in my photos is Galaxy Silver PLA Prusament. It was just some random luck to have something laying around that actually matches the bottle design.
  • The handle ring originally had a diameter of 101mm. I did widen it a little (101.2mm) because otherwise we did not mange to push this over the bottle. If the fit is to loose for you feel free to use the provided STEP file and create your own version. But then maybe you need to print your own tools to get this onto the bottle.
  • The handle has a slightly different geometry, as otherwise it wouldn't print so nice - but follows the original design. Again, if you want to change anything use the STEP file.

Nice thing is that now you can have multiple versions of the handle in different colours. 🤩

Tags



Model origin

The author marked this model as their own original creation.

License