@DoomerDGR8_1810289 if you take of youre buildplate you see 2 screws if you unscrew those the original clip that keeps the connector in place will come off. you can then put the model under the bed and put the screws back in. If you want you could also get longert countersunk screws and reatatch the clip under the model
@bazzzzzzz_230758 I was able toprint and use the original screws but realized they keep losing up. You recommended 2 x M3 15mm Countersunk screws with nuts. I'm trying to buy a Machine Screw box but they all come with a 16mm M3. I can't find a 15mm: https://a.co/d/h0I9yqT
@DoomerDGR8_1810289 printer is running now so can't look up the exact length I have in there now.. but you could use longer ones there is room enough under the bed and if it's loosening up for you you might want to remount the original bracket under it then there is no way for it ever to loosen up
I printed this successfully and to the author, this is fantastic!
I need someone to tell me how the neptune-4-and-pro-v8.stl is to be mounted. There are screws involved?
@DoomerDGR8_1810289 if you take of youre buildplate you see 2 screws if you unscrew those the original clip that keeps the connector in place will come off.
you can then put the model under the bed and put the screws back in.
If you want you could also get longert countersunk screws and reatatch the clip under the model
@bazzzzzzz_230758 I was able toprint and use the original screws but realized they keep losing up. You recommended 2 x M3 15mm Countersunk screws with nuts. I'm trying to buy a Machine Screw box but they all come with a 16mm M3. I can't find a 15mm: https://a.co/d/h0I9yqT
@DoomerDGR8_1810289 printer is running now so can't look up the exact length I have in there now..
but you could use longer ones there is room enough under the bed and if it's loosening up for you you might want to remount the original bracket under it then there is no way for it ever to loosen up