Ender 3 S1 / S1 Pro Camera Mount for Logi C920 with IKEA Jasjö Lamp clip

The original very nicely clips on to the end of the Z-axis rail. This version adds a small clip for the IKEA Jasjö USB lamp which is very cheap but quite effective,  shortens the arm and strengthens it where it joins to the base clip (as I broke mine) and adds a little clip to tidy the cables away.

I believe this may work with other Logi cameras with the same base clip mechanism.

To add the lamp slot it in just behind the thicker part of the cable behind the lamp, then push in from the front. You may need to file this a little so that it is snug but not going to break the clip.

If you don't need the lamp clip, just blank it out with a negative additional cube part in your slicer 

Printed at 0.24 using Basic Creality PLA (so any will do) with mouse ears and no supports.

EdinBearDragon

Shortened the camera bar, strengthened the joint (I broke the original by knocking it with my hand), added mount clip for cheapo (£5) IKEA Jasjö USB lamp and added a cable tidy clip.