Unofficial Nextion display enclosure for Gaggiuino

Remix of this model made by Matias Rossi. It houses the Nextion 2.4" display on machines like the Rancilio Silvia. I made this to mount it on the bottom part of my Silvia V3. You can then route the cable on the underside.

What has changed?

Moved the cable routing from the top to the bottom so it is compatible on older machines.

Additional hardware

• 6x M2x5 self tapping countersunk screws
• 4x 10x3mm magnets (some machines are not magnetic so check this)

Alternatively you can stick the enclosure to your machine with something like adhesive velcro.

If you printed this model and like it, consider uploading a make and giving the model (and the original) a like.

Removed the part that routed the cables trough the top. Made it so that the cable can go trough the bottom so it is compatible with other machines.