Eiffel tower Hueforge

Eiffel tower Hueforge

No AMS Needed, Just manually switch the filament. I used what I have on hand.

Don't forget the frame

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA+ IIID Max Fuchsia Transmission Distance: 8
PLA+ IIID Max Pink Transmission Distance: 5
PETG JAYO White Transmission Distance: 6

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue
At layer #12 (1.04mm) swap to Fuchsia
At layer #17 (1.44mm) swap to Pink
At layer #19 (1.6mm) swap to White for the rest.

Please "Like", review, follow and upload make.

I spend a lot of time designing and allow it all to be used for free (including commercially).

If you'd like to help me out, below are the possible ways. Thank you in advance!

https://www.buymeacoffee.com/dohara1985o

Venmo: Dohara1985

Paypal: @Dohara1985

Tags