Voxelab Aquila Filament Guide
Extended arm 8mm from mounting location to work with a Voxelab Aquila
5
37
1
311
updated December 24, 2023
Summary
PDFExtended arm 8mm from mounting location to work with a Voxelab Aquila
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Extended guide arm 8mm from mounting location to work with a Voxelab Aquila shown on the left in the photo. The original is on the right
Included STEP file for future modding.
About a 2 hr print using around 5 meters of filament.
Uses 608 Skate board bearing. Print in place models available if you don't have metal bearing available. I used https://www.printables.com/model/631758-smooth-bearing-608-22x8x7mm-print-in-place as a temp bearing until my real 608 arrived.
