Christmas tree

A little Christmas tree! 

Lights can be printed in multiple color or can be painted . It can also be turn into a lamp by printing transparent light with 2 wall and no infill and adding led at the bottom of the tree. A remote led puck  hot glued in the base would do the trick. 

 Parts should to be glued in place.  

I've printed 3 sizes 100%, 95% and 50%. Alll in pla.                 

Layer height 0.12 and 0.1

wall: 4 (100%) and 3(50%)

Infill: 20%

support:

     - Star = Yes 

     - Tree = Only the bottom of the tree. Up to the end point of the first and largest batch of               branch. 

 Brim:  Yes  (optional for the cap) 

Printed each color of light by batch of 7 ( there is 44 light) and  the Star by batch of 3 to give cooling time and better chance at getting one with perfect tips. Bottom tips are stuck on support and can a bit more fragile depending on filament! 

Having a few extra lights printed of each color gives you a chance for variation in the placement. And if you displace one your still in business! They like to bounce on the floor and then disapear. So big warning: The christmas elfs love them!     

 I'm adding 3 extra files :

-NoHoles_Xmas tree_with light : Need a Xmas tree star printed ( i recommend this one. Star is  the weakest part, so to avoid print fail due to the star and making it replacable.

-Xmas Tree_with lights and star : not recommended but here it is! I suggest printing the star  separately

-NoHoles_only tree : Simle tree with no ornaments.