I bought an enclosure for my E3S1 and the cable chain from the base to the gantry wouldnt fit. I rotated the chain 90 degrees to the front. Now it works great!
Note, it is a bit tight getting the cable in and it is just a little short of the full height the printer can reach on the Z axis but I have yet to print anything that tall. I make it up to 250mm without issues.
I printed these using CHEP's profile for a 0.6mm nozzle and 0.44mm layer height. Also, pardon the random color transition. I took this print as an opportunity to use up the last little bit of a spool of grey filament.
The author remixed this model.
Rotates the cable chain from the base to the gantry by 90 degrees.