This enclosure offers 8 bays for 3.5" drives.
Backplane used Supermicro SAS825TQ(other backplanes might work but this model was created with this one in mind)
Compatible caddies: My Remix of the Dell Server 3.5" Hard Drive Tray & Caddy by cgunz410 (Added speed holes :))
(Per one 2U unit)
Part | Description | Quantity |
---|---|---|
Backplane(Supermicro SAS825T) | 1 | |
M3 x 25mm | Used to fasten handles or Fan Grills to fronts | 4/8 |
M3 x 20mm | Used to fasten walls together with fronts/backs | 28 |
M3 x 10mm | Used to fasten center walls together | 12 |
M3 nuts | Used to hold everything together | 44 |
120mm Fans/80mm fans | Depending how much units you want to print you will have to chose what fans you want to use. 120mm fans are for 2 units joined together, 80mm fans for single unit. You can use use them together for example if you have 3 units you can use 1 120mm grill and 1 80mm grill or 3 80mm grills. Both versions use 3 fans. | 3 |
(per one 2U unit)
Part | Quantity | Comments |
---|---|---|
Left Front Frame | 1 | |
Right Front Frame | 1 | |
Left Full Side | 1 | |
Center Right Wall | 3 | |
Center Left Wall | 3 | |
Right Full Side | 1 | |
Left Back Frame | 1 | |
Center Back Frame | 1 | |
Right Back Frame | 1 | |
Left Board Holder | 1 | Used to hold left back frame with center back frame. Also limits movements of the backplane |
Right Board Holder | 1 | Used to hold center back frame with right back frame. Also limits movements of the backplane |
Front Handle | 2 | Used to hold fronts together |
Connector* | 10 | Used to connect 2 or more units together |
Front connector* | 1 | Used to fasten fronts of two units together |
120mm Fans Grill - Left | Fits single 2x2U units | |
120mm Fans Grill - Right | Fits single 2x2U units | |
80mm Fans Grill - Right | Fits single 2U units | |
80mm Fans Grill - Right | Fits single 2U units |
*Necessary when planning to use more that 1 unit
The author marked this model as their own original creation.