Dacia Jogger 2022+ Parcel Shelf Handle

The Dacia Jogger 2022+ has a retractable and removable roller parcel shelf blind. To keep costs down Dacia appear to manufacture it with a blank where the handle should be, but don't actually cut out the handle hole or put any kind of plastic handle or fitting in.

I was asked by some fellow Jogger drivers to see if I could come up with a handle to fit in the parcel shelf once the hole has been cut out. It took me way longer and more versions than it should have but this is my solution.

Version 7.1 is a clip together top and bottom piece.

Version 8.1 is the same but with fittings for nuts and bolts for added secure fitting. You will need M4 nylock x 4 and M4 14mm Allen cap head bolts x 4, and will need to drill 4mm holes in the parcel shelf surround for fitting of this version.

Version 7.0 is the clip together design without the DC logo or a grip texture. This version can be printed face down with no supports but has a flat surface (I found the layer lines and glassy surface unpleasant myself).

I printed these face up with normal supports; this preserves the textured grip design on the top layer. The underside can look a little rough depending on how good your supports are but this can't be seen when fitted anyway.

Recommend printing in ABS or PETG as they will be sitting in a car window, exposed to UV and temperatures high enough to deform PLA.

https://paypal.me/benjohnmiller

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3

Rafts:

No

Supports: 

Yes

Resolution:

0.2mm

Infill: 

20%

Filament: U2 Fila ABS Black

Category: Automotive