KLP1 Right Motor Belt Parallel

The belt of the KLP1 has a lot of non-parallelism, and this design tries to solve the problem by shifting the position of the synchronizer wheel next to the right motor.

The strength of the print may not be sufficient, please do not adjust the belt too tightly to avoid damage.

The tolerances are set very tightly to prevent the parts from falling off easily, and the assembly is not easy. It is recommended that you need to pick up the gears of the right motor to make space for operation and prepare two replacement screws (M3X5) for locking the motor.

我製作了金屬版本，台灣可以直接在蝦皮購買:
https://shopee.tw/product/26887806/24504310049/

Print Settings

Rafts:

No

Supports: 

No

Resolution:

Infill: 

100%

Filament: ABS,ASA

Category: 3D Printer Parts