Made some caps for my Sofle build, thank you
You may print a bunch at a time placing them back to back side on the bed
"KEA" Profile Choc V1 Keycaps - MX Spaced - by Kea Workshop
MX Switch Spaced keycaps for Choc V1 Switches. Idea based off the Work Louder keycaps.
75
507
7
3132
updated April 3, 2025
Makes
Comments
Printed in Elegoo Matte PLA at 0.07mm layer height. Love these!
Do you mind adding a homing thumb cap please? really need it on Sofle
Will add a homing thumb cap!
appreciate it!
can we possibly get a 1u and 1.25u for a thumb where the bottom doesnt slope back up but sloped down to be more comfortable as a thumb key?
@Autoferrit_303431 Done, these are added to both GitHub and Printables. They do not have the slope back up anymore, instead it continues straight at the bottom of the dome to the side of the keycap. At this time they do not slope down as i think the geometry of the underside of the keycap may have to change or they keycap will need to get taller. If you print these, please let me know how they are and I can investigate the downslope down when i get back from my holiday if it needs it (currently in Japan in a hotel room doing this on my laptop!)
Cheers!
Claude
Came out great, I think they would have been even better if I could get the print profile to work. (.3mf)
Is there a 1.25u of these?
@KeaWorkshop_1577934 thank you very much! I'll post a make when I got the 1.25's done!
Hey @KeaWorkshop_1577934, Love the keycap design. Would you mind sharing the fusion file so I can remix these into MX stem compatible keycaps?
@Tomie_2640762 hey mate, no fusion files sorry, i don't use fusion, just the STEP files found here or on the GitHub.
So you by chance have a sprued version of this to send to somewhere like JLCPCB? Usually it's in a row of 9 or 10
@Autoferrit_303431 i dont sorry, i have never used JLCPCB for 3D printing
Printed on the A1 with Bambu Labs Matte Sakura Pink and iSANMATE Pastel Rainbow. They came out amazing. I can't wait to put them on my board.
@SadWitch_1592034 awesome colour choice, love it!
i really like the look of these keycaps. the only downside are the short pins. would love a version with longer/normal pins
View 2 more comments
@BenjaminR_1338789 fair enough, its an easy enough fix. when i get some free time ill update.
@KeaWorkshop_1577934 nice, thank you!!
Fantastic model and works in the multiple filaments I've tried but the best has been Bambu Basic PLA so far.
I'm super satisfied with the way these turned out! They fit snugly into choc v1 switches.
I'd recommend using some easily detachable support material for the brim to avoid rough edges on the bottom of the print.
Printed in BambuLab PLA Basic orange, Jayo PLA+ black and Filamentum Crystal Clear Amethyst Purple using recommended print settings from the 3mf-file.
@ntnt awesome mate, glad you like them! Enjoy!
@ntnt Reeally dig the translucent purple version!