For some reason I tend to lose the battery covers of my EN-EL15 Batteries. Therefore I designed a replacement. It was also a Test for printing with (semi-) flexible material on my i3 MK3.
In the meantime I got feedback that for a tight fit, the model should be printed at 98%.
(Thanks to Divideby0 and the others for reporting.)
Printer Brand:
Prusa
Printer:
i3 MK3
Supports:
No
Resolution:
OPTIMAL (0.15mm), Nozzle: 0,4mm
Infill:
Default. The walls are 1.2mm thick, this is exactly 3 perimeters with the 0,4mm Nozzle. Therefore, no infill generated.
Notes:
None.
Sourcefile provided.
The author marked this model as their own original creation.