Simple Cover for 360W PSU + Switch

I heavily tweaked Seadevil's awesome design to move the switch to the other side of the cover as I have my PSU vertically mounted in a specific direction. Overall this design uses less plastic, less space and provides more internal space for wiring.

Here are the main changes:

• Increased the front hole to be much wider and go across the whole cover to facilitate wiring and voltage adjustments.
• Removed the waves as it was unnecessarily complicating the print and have no structural issues.
• Increased internal space by about 3mm in height to accommodate the switch mounting holes.
• Changed the Wire holes cover to allow for later installation without rewiring anything.
• Rotated the switch 180 degrees so you can more easily grip the side and flip the switch on and off.

• Copied the right side vent holes to the left to make the design cleaner. This is the exact power supply I bought and created the design for: https://www.amazon.com/gp/product/B01EWG6YT8/ref=oh\_aui\_search\_detailpage?ie=UTF8&psc=1

  Print Settings

Resolution:

0.3

Infill:

10%