EN
I needed a wall-/celing-mount for my AXIS M1025 cameras which would fit onto a flush-mounted box.
Couldn't find one, so I designed my own :)
Printed with Bambulab PLA on X1C with default settings.
Hole for RJ45-cable (15mm) is a tight fit, might not fit every cable!
DE
Für meine AXIS M1025 Kameras brauchte ich eine Halterung, welche auf eine Unterputzdose passt.
Da ich keine passende Halterung finden konnte, habe ich selbst eine entworfen :)
Gedruckt mit Bambulab PLA auf einem X1C mit Standardeinstellungen.
Das Loch für's LAN-Kabel (15mm) könnte je nach Kabelmodell etwas eng sein.
The author marked this model as their own original creation.