Robot Hero - Animal Crossing Serise

Model Name : Robot Hero - Animal Crossing Serise

Size : 190 mm

Level : ★★★☆☆

Color Required : White, Black, Red, Yellow, Dark Gray, Silver, Cyan

Designer : @Bread_Ryu

1) This model is based on an FDM 3D printer that must support TPU output.

2) The wall thickness must be set to 1.0mm (TPU is 1.2mm). Assembly is not possible if the outer wall value is arbitrarily increased.

3) Please make sure to follow the instructions in the manual included in the file, We are not responsible for any damage caused by ignoring this and assembling it.

4) The model tolerance was adjusted as much as possible, but it may vary depending on the accuracy of the 3D printer you are using.

5) Where is the “Right” (*_R.stl) file?

Only “Left” (*_L.stl) files are provided, to increase efficiency by reducing capacity and number of files. You need to copy and print the opposite file using the mirror function of the slicer you use.

6) The Zip file includes the assembly manual. Please make sure to assemble it while looking at it.