Spool Adapter (52,5mm outside, 32mm inside, Length 65mm) (Added a 82mm long version)

Spool adapter for most cardboard spools Spins very easily, Loose thread should work on ANY printer.
0
11
0
89
updated December 17, 2023

Description

PDF

Very easy to print adapter for most cardboard spools. The length between the 2 Flanges is 65mm (i just looked into my spools and found 1 wider one) 

Rotates effortlessly. Thread is pretty loose (because it does not have to withstand ANY force), so it should work with any printer no matter how bad your printer tolerances are. You might have to modify your spool holder for it to work, depending on what style you got. 

 

I personally had to Sand down the Spool holder to be able to fit it through the adapter, since the flange on the spool holder is just there to prevent it from sliding out (my hole diameter is like 30 and i left the flange at 31,5 ish so it still registers and cannot slide out while being able to slide it through the adapter) 

Tags



Model origin

The author marked this model as their own original creation.

License