Alien Dude

Of course aliens can be cool….like this Alien Dude.

This filament painting comes on two sizes and options:

• Single Model - 4 colours for easy print
• 4 Parts - 7 colours (can use this model to mount it to the wall)

Recommend for all models, to print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Single Part

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Ziro Dark Gray
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #7 (0.64mm) swap to Charcoal Black
• At layer #11 (0.96mm) swap to Dark Gray
• At layer #20 (1.68mm) swap to White for the rest.

4 Parts

Filaments Used:

• PLA Overture Black
• PLA PolyTerra Charcoal Black
• PLA Overture Cement Gray
• PLA+ Sunlu Gray
• PLA BambuLab Basic Gray
• PLA Overture Light Gray
• PLA Overture White

Swap Instructions:

• Start with Black
• At layer #8 (0.72mm) swap to Charcoal Black
• At layer #12 (1.04mm) swap to Cement Gray
• At layer #16 (1.36mm) swap to Sunlu Gray
• At layer #21 (1.76mm) swap to BambuLab Gray
• At layer #25 (2.08mm) swap to Light Gray
• At layer #30 (2.48mm) swap to White for the rest.