Easier Print - Ancient Guardian from Zelda Breath of the Wild
Support-less, print-in-place articulated Guardian model. Remixed with stabilising struts so you don't need a brim.
300
1415
14
4651
updated December 2, 2024
Description
PDFRemixed for easier printing. No supports needed.
Prints well with both 0.4mm nozzle/0.2mm layers and 0.6mm nozzle/0.3mm layers.
Looks especially snazzy in coextruded silk PLA.
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
The outermost parts of the main body kept getting knocked off the build plate when I printed the original, so I added small stabilising struts to connect them to the main body for the first few layers. Only adds a tiny bit of print time but makes it much easier to print and eliminates the need for a brim. The struts are not visible from outside, only if you look from underneath.
