Parametric Box - no screws needed
All the hinges and latches held by the pieces of 1.75 filament.
PETG recommended
170
551
4
4251
updated January 4, 2024
Description
PDFYou can seal the filament ends cautiously with a lighter or soldering iron
- All the hinges and latches are held by the pieces of 1.75 filament
- Latches are changed to have rounded hooks
- The minimum allowed height of the assembled box is lower now, tested down to 20mm
PETG recommended
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
- All the hinges and latches are held by the pieces of 1.75 filament
- Latches are changed to have rounded hooks
- The minimum allowed height of the assembled box is lower now, tested down to 20mm
