XIAO Sense Case (Seeed Studio XIAO ESP32S3 Sense, Camera)

Printed this for my XIAO Sense camera that I use with Prusa connect. Printed in 0.20mm layer, 100% infill. Works well! (edited)

Printed the open versions in PLA with 0.6mm nozzle at 0.3mm layer heights. In my application, the ESP32 doesn't get too warm since I am only taking a JPEG every 5 minutes.

The only issue was that the opening had to be enlarged on the heatsink end to fit. Not sure if Seeed has changed the size of the heatsinks.

I plan to make a mounting plate for the antenna and to attach the camera assembly to a meter.

Can you click the two buttons with this case?

Very nice fit. Now I just need to add a way to hang it.