3/8" Drive Metric Socket Set Holder (7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm)

Socket set holder for 7-19mm sockets. Fits my craftsman set. Printed in PLA.

If this design was helpful, please consider liking the design on Thingiverse!

Check out my other socket holder designs:

• 1/4" Drive Metric Socket Set Holder (4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm)

https://www.thingiverse.com/thing:6320137

• 1/4" Drive Metric Socket Set Holders (4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm)

https://www.thingiverse.com/thing:6320109

• 1/4" Drive SAE Socket Set Holder (5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16) OPTION 1

https://www.thingiverse.com/thing:6325223

• 1/4" Drive SAE Socket Set Holder (5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16) OPTION 2

https://www.thingiverse.com/thing:6325207

• 3/8" Drive SAE Socket Set Holder (1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8")

https://www.thingiverse.com/thing:6325866

• 3/8" Drive Metric Socket Set Holder (7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm)

https://www.thingiverse.com/thing:6320126

Print Settings

Printer Brand:

Artillery

Printer:

Artillery Sidewinder X1

Rafts:

No

Supports:

No

Resolution:

0.4 Nozzle

Infill:

20

Filament: Generic PLA Red How I Designed This ===================

3mm base

Shallow sockets have 10mm tall wall

Deep sockets have 20mm tall wall

Font is Arial Size 24 Bolded

Socket holes are +0.5mm from actual measured diameter (using digital caliper)