Garmin Xero C1 Arm

Mounting rail/arm for the Garmin Xero C1 chronograph. Comes in three lengths (3", 4", 5") with either the 17S footprint (for use with Area419 ARCALOCK clamps) or a generic footprint that should work with Amazon sourced clamps (eg. SmallRig). The generic footprint version was modeled using the SmallRig clamp, but wasn't printed for validation. YMMV.

The 17S mount requires 2x 16mm M5 flat head bolts and nuts, while the generic mount uses 2-3x 10-14mm pan head bolts, depending on the clamp. A single 0.5in ¼-20 pan head screw or a ¼-20 thumb screw with 9-10mm relief is required to attach the Garmin Xero C1 to the arm.