Maono USB Tripod Microphone Stand

This model is pretty specific!!  This is for an older Maono USB PM360TR.  Not sure if that's the exact model, but the amazon listing for it looks like mine, just with an XLR cable.

The included plastic tripod broke pretty early on for me, so I made this replacement.

The tripod works with 3/8" bunk bed pins (some pieces of steel which are cheap to come by and I had lying around).  They work for me.  The little feet were printed in black TPU, though you could easily also use PLA for them.

The tripod mount portion is held in place by the original mount screw, though you could use hot glue or whatever else you have lol.

The model was designed with a 0.1mm tolerance, but that was too tight for me, so I had to print at 102% scale, which worked perfectly.

Printed at 0.2mm layer height, no rotation, with automatic support enforcers and organic supports by Prusaslicer.

In case you're insane and want to use this model without the steel pins, included is a 3/8" diameter cylinder with a side sliced off, which should help with printing effectively.  Make sure to print with the flat side on the build plate so that the model will be a little stronger in the important direction (lateral).

I've also included the F3D files, in case anyone has differently-sized dowels and would like to remix.

Hopefully this helps at least one person out there!! <3

-Maia