Camera Trigger for CR-6 SE

This is a camera trigger mount designed specifically for the CR6-SE. It was designed to be able to easily mount either a hard-wired switch or a remote. The switch/trigger mount was designed to flex the trigger being pressed hard if required. 

Although it works great with my Bluetooth remote camera trigger, the blue-tooth connection will time-out  when printing time-consuming layers, so I almost exclusively use the hard-wired switch which I have connections for both my cellphone camera, as well as my DSLR.

I use the CURA slicer to add code via postprocessing to trigger the camera after each layer, producing excellent time-lapse videos.

Layer height: .2

Infill: 20%

Filament: PLA