Beijer Electronics x2 Pro stand

Fits most models but was explicity made for a 21 inch screen, will also work with 10 inch (tested)

8h 2m

1× print file

0.20 mm

0.40 mm

66.00 g

updated September 13, 2024

Description

Great to use while programming and creating HMI.

Was previously lower and therefor smaller inches of screens had problem with ethernet cable RJ45 contact came to low against table, now fixed.

PETG or PLA. Tested with later.
In slicer you can scale down Z to 70% to save material.

The author marked this model as their own original creation.