Small little wiper to get rid off some ooze before leveling.
What you will need as standard parts:
4x M3x20mm for the Heatbed Plate mount
2x M2x10 for the clamping brush frame
2xM2 CNC kitchen or Ruthex heat inserts
The author remixed this model.
Different brush/wiper used made of silicone. It is the wiper of the Brand that should not been mentioned with it smallest printer accessories. Same as
https://www.printables.com/@seaspotter_1417166
did with
https://www.printables.com/model/635160-voron-24-bedpan-v3-with-silicon-nozzle-wiper
Here is my current g-code adder.
G1 E-10 F2400 ; more retraction to compensate oozing before nozzle cleanup
; Start surfalex2000 nozzle brush cycle
G1 X160 Y-5 Z5 F24000; nozzle brush cycle
G1 X160 Y-5 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-5 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-4 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-4 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-6 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-6 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-5 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-5 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-4 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-4 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-6 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-6 Z1 F24000 ; nozzle brush cycle
G1 X200 Y-5 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-5 Z1 F24000 ; nozzle brush cycle
G1 X160 Y-5 Z5 F24000 ; nozzle brush cycle
; End surfalex2000 nozzle brush cycle
For the V2 without the inner surrounding edge of the brush.
@IBNobody
G1 X160 Y-5 Z5 F24000 ; nozzle brush cycle - move to brush
G1 X160 Y-9 Z1 F24000 ; nozzle brush cycle - lower nozzle and move to y -9
G1 X200 Y-9 Z1 F24000 ; nozzle brush cycle - swipe left to right at y -9
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-7 Z1 F24000 ; nozzle brush cycle - move to y -7
G1 X200 Y-7 Z1 F24000 ; nozzle brush cycle - swipe left to right at -7
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-9 Z1 F24000 ; nozzle brush cycle - move to y -9
G1 X200 Y-9 Z1 F24000 ; nozzle brush cycle - swipe left to right at y -9
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-7 Z1 F24000 ; nozzle brush cycle - move to y -7
G1 X200 Y-7 Z1 F24000 ; nozzle brush cycle - swipe left to right at -7
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-9 Z1 F24000 ; nozzle brush cycle - move to y -9
G1 X200 Y-9 Z1 F24000 ; nozzle brush cycle - swipe left to right at y -9
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-7 Z1 F24000 ; nozzle brush cycle - move to y -7
G1 X200 Y-7 Z1 F24000 ; nozzle brush cycle - swipe left to right at -7
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-9 Z1 F24000 ; nozzle brush cycle - move to y -9
G1 X200 Y-9 Z1 F24000 ; nozzle brush cycle - swipe left to right at y -9
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-7 Z1 F24000 ; nozzle brush cycle - move to y -7
G1 X200 Y-7 Z1 F24000 ; nozzle brush cycle - swipe left to right at -7
G1 X200 Y-8 Z1 F24000 ; nozzle brush cycle - move to y -8
G1 X160 Y-8 Z1 F24000 ; nozzle brush cycle - swipe right to left at y -8
G1 X160 Y-5 Z5 F24000 ; nozzle brush cycle