Thumbstick Tops for Odin 2. Top is the same size as Joycon tops. All parts are meant to be friction fit, use glue at your own risk.
4 Thumbstick styles
1 Height Adjuster for use with stock top
Printed on A1 Mini. The smaller the layer height the better; I test printed as low as 0.08mm Layer Height and as high as 0.16mm Layer Height, also Variable Layer Height.
*for anyone who didn't know, the tops of the thumbsticks for the Odin 2 are friction fit so with a little force they pop right off\
USE THE HEIGHT ADJUSTMENT AT YOUR OWN RISK, IT IS VERY FRAGILE AND CAN GET STUCK INSIDE THE STOCK THUMBSTICK TOP
The author marked this model as their own original creation.