Samsung Galaxy Tab A7 Lite - Magnetic Case + Wall Mount

I wanted to be able to wall mount my A7 Lite Tablet, while also able to remove the tablet from the wall and use as necessary. Existing models on this site had great permanent solutions but few allowed for removal/reinstallation of the tablet on its mount. 

I ended up remixing this case to add holes for 6x2mm magnets that get press fit into the case, and then created a wall plate that matches. The wall plate gets mounted to the wall with #8 screws (I screwed one into a stud and the 2nd into the drywall - seems to be plenty strong enough). 

Be sure to check your magnet polarities when press fitting them into the holes. I ended up using 2 copies of the jig (with reversed polarities) found at this link (HERE). This helped ensure that all magnets mated to each other without any issues. 

Printed in BambuLab Matte Black PLA, 0.2mm layer height

• Added holes to existing case to press fit 6x2mm magnets
• Created wall mount plate that interfaces with magnets on case