This is an enlosure (bottom and top) for the PicoW while hosted on an ElectroCookie PCB that measures 2.05" x 3.5". The PCB's mounting holes use M3 for the center holes and M2 for the corner ones.
The PCB mounts to the bottom part of the enclosure and the enclosure supports the PCB holes by including small guiding holes that need to be tapped for use with the desired screw sizes. The enclosure top contains two holes (to attach to bottom) and are set for M2. USB access and clearance for vertical helical wire antenna is provided.
Printed on Atomic PLA.
The author marked this model as their own original creation.